Padlock structure description:
(1) the introduction of the lock body: lock body is the main assembly of the padlock, all parts are included, and the retail closed in the lock body drilling a trademark hole, lock beam hole, lock core hole, drip hole, , Pin hole, core pin hole, these holes are used for and with the corresponding parts.
(2) Description of the lock beam: lock beam is one of the main elements of the locking mechanism, it can be with a certain static pressure. The small neck and the missing part of the locking beam are the pin groove which is matched with the beam pin. The neck part can make the lock beam under the control of the beam under the control of any rotation, the missing part is the lock beam when the beam lock Of the channel. The tongue groove is a key part of the lock beam lock can be strong, the accuracy requirements are higher.
(3) the introduction of the lock cylinder: padlock lock the core of the head has two claws, claws and tongue with the completion of the conversion of the action, by the claws instead of the tongue for the internal movement, the lock cylinder rotation Into the movement of the tongue. In order to improve the anti-pull effect of the lock, the key of the lock cylinder is processed into S-shaped or shaped.
(4) the introduction of the tongue: the lock tongue and lock beam is a tacit understanding of the original locking mechanism, requires both flexibility and flexibility, but also have a certain intensity. The tongue of the tongue and the tongue of the lock beam fit, when the lock beam is pressed, the slope is used to decompose the pressure of the lock beam, and the bottom plane of the tongue is used to prevent the jumping of the lock beam. The bottom of the tongue and the lock cylinder with the lock to complete the opening function, while the lock plate by the lock beam compression does not drive when the lock cylinder rotation.
(2) Description of the lock beam: lock beam is one of the main elements of the locking mechanism, it can be with a certain static pressure. The small neck and the missing part of the locking beam are the pin groove which is matched with the beam pin. The neck part can make the lock beam under the control of the beam under the control of any rotation, the missing part is the lock beam when the beam lock Of the channel. The tongue groove is a key part of the lock beam lock can be strong, the accuracy requirements are higher.
(3) the introduction of the lock cylinder: padlock lock the core of the head has two claws, claws and tongue with the completion of the conversion of the action, by the claws instead of the tongue for the internal movement, the lock cylinder rotation Into the movement of the tongue. In order to improve the anti-pull effect of the lock, the key of the lock cylinder is processed into S-shaped or shaped.
(4) the introduction of the tongue: the lock tongue and lock beam is a tacit understanding of the original locking mechanism, requires both flexibility and flexibility, but also have a certain intensity. The tongue of the tongue and the tongue of the lock beam fit, when the lock beam is pressed, the slope is used to decompose the pressure of the lock beam, and the bottom plane of the tongue is used to prevent the jumping of the lock beam. The bottom of the tongue and the lock cylinder with the lock to complete the opening function, while the lock plate by the lock beam compression does not drive when the lock cylinder rotation.
Comments
Post a Comment