Laser Cutting Machine With Automatic Sheet Storage System

Compared with the traditional oxyacetylene, plasma and other cutting process, the laser cutting speed is fast, the slit is narrow, the heat affected zone is small, the edge of the slit is very good, the trimming is smooth, and the type of material can be cut by laser, , Stainless steel, alloy steel, wood, plastic, rubber, cloth, quartz, ceramics, glass, composite materials. With the rapid development of market economy and the ever-changing science and technology, laser cutting technology has been widely used in automotive, machinery, electricity, hardware and electrical and other fields. In recent years, laser cutting technology is an unprecedented pace of development, each year to 15% to 20% growth rate. China since 1985, it is an annual growth rate of nearly 25%. At present, the overall level of laser cutting technology in China and advanced countries, there is still no small gap, therefore, in the domestic market laser cutting technology has broad prospects for development and huge application space.
In the cutting process, the beam is focused by the lens of the cutting head into a small focal point, so that the focal point reaches a high power density, where the cutting head is fixed on the z-axis. At this time, the beam enters the heat much more than the material is reflected, conduction or diffusion of part of the heat, the material is quickly heated to the melting and vaporization temperature, at the same time, a high-speed air flow from the coaxial or non-coaxial side will melt And the vaporized material is blown out to form the material to cut the holes. With the relative movement of the focus and the material, the holes are formed into a continuous width of the narrow slit to complete the cutting of the material.
Operation steps: 3.1.1 Before adjusting the limit sensor to the desired position, then turn on the power, check the panel display and power indicator, manual control keys, automatic devices and the slider device is normal. 3.1.2 Check all the rotating parts of the lubrication is good, whether the grinding wheel in place or abnormal, blade surface is intact without cracks, all the boot before the inspection can be officially launched. 3.1.3 Press the power switch to check whether the power supply current is normal, make sure that the cutter start button is turned on, and the blade is tightened with the fit of the tool position. Then the grinding wheel start button is also opened. Adjust to contact blade, gently grinding. 3.1.4 until the blade grinding sharp, and then test machine, commissioning the height of the upper and lower beams to test the accuracy of its operation. 3.1.5 After the above conditions can be carried out after the normal operation of the normal operation, the first leveling surface, so that the material formation, and then cut into the required size of its specifications, and then a layer of slice The 3.1.6 machine work in the process of abnormal phenomenon, quickly press the "emergency stop" button, this time the machine is in the running state.