Maintenance of locks
Different from the commercial hardware standards, civilian hardware accessories with a long time, prone to here, there are many problems. Especially the door lock, this high-load operation of the parts, long life, it will inevitably be a little trouble. Often found some users and friends, home door locks are often damaged because of the use or maintenance caused by.
Door lock maintenance to pay attention to some of the things:
Lubricants
Some friends in the door lock when the astringent, or tight, often like to lock the eye drops some oil, so that the door may be all the body on the smooth, but because the oil easy to stick, after the keyhole It will be easy to slowly accumulate dust, and the formation of oil putty, which makes the lock more prone to failure.
The correct solution: cut some pencil crushed or some candles at the end, through the thin tube into the lock cylinder inside, and then insert the key repeatedly turn several times.
Open the door is not smooth
Some time, due to the reasons for their own gravity gates, or door leaf reasons, resulting in the door sinking, there lock door or open the door is not smooth phenomenon. This time is often the key to open the door, lock the door is very difficult. At this point, do not force to twist the key, so as not to break the key, increase the trouble.
The correct solution: you should first check the reason. If the loose leaf is caused by loose loose sheets, the loose loose leaf should be fastened with screws. If the door frame deformation or its causes can not be restored, you can start from the door frame, the corresponding expansion of the lock, so that the door lock door can be restored to normal smooth.
Different from the commercial hardware standards, civilian hardware accessories with a long time, prone to here, there are many problems. Especially the door lock, this high-load operation of the parts, long life, it will inevitably be a little trouble. Often found some users and friends, home door locks are often damaged because of the use or maintenance caused by.
Door lock maintenance to pay attention to some of the things:
Lubricants
The correct solution: cut some pencil crushed or some candles at the end, through the thin tube into the lock cylinder inside, and then insert the key repeatedly turn several times.
Open the door is not smooth
Some time, due to the reasons for their own gravity gates, or door leaf reasons, resulting in the door sinking, there lock door or open the door is not smooth phenomenon. This time is often the key to open the door, lock the door is very difficult. At this point, do not force to twist the key, so as not to break the key, increase the trouble.
The correct solution: you should first check the reason. If the loose leaf is caused by loose loose sheets, the loose loose leaf should be fastened with screws. If the door frame deformation or its causes can not be restored, you can start from the door frame, the corresponding expansion of the lock, so that the door lock door can be restored to normal smooth.
Comments
Post a Comment