Elevator control cabinet, is a variety of electronic devices and electrical components installed in a safety protection of the cabinet structure within the electronic control device. Also known as the elevator central control cabinet.
Elevator control cabinet is used to control the operation of the elevator device,
generally placed in the elevator room, the machine room elevator control cabinet placed in the hoistway. Control cabinet by the sheet metal frame structure, bolted assembly. Sheet metal frame size uniform, and can be used to easily hang plastic pin, remove. The front panel is equipped with a rotatable pin hook that constitutes a lockable door that can be locked to contact all components installed in the control cabinet from the front so that the control cabinet can be installed close to the wall. Commonly used two elevator control cabinet a) two doors b) three doors.
The installation of the control cabinet should follow the maintenance of convenience, inspection of the principle of safety, according to the provisions of the location of the construction. If the drawings are not provided, should be based on the engine room area, the installation of a reasonable arrangement. In order to prevent the room water, the control cabinet in the installation of the best solid in the high about 100 ~ 150mrn cement pier. Stable control cabinet, the general first with the brick to the control cabinet pad to the required height, and then laying wire or wire trunking, to be completed after the wire tube or wire trash, and then watering cement piers, the control cabinet solid in the cement pier The
The control cabinet should meet the following requirements during installation:
(1) with the door, the window to maintain a sufficient distance, doors, windows and control cabinet of the distance should not be less than 1000mm.
(2) control cabinet installed in rows, and its width exceeds 5m, both ends should be left out of the channel, the channel width should be not less than 600mm.
(3) control cabinet and machine room equipment installation distance should not be less than 500mm.
(4) The vertical deviation of the control cabinet after installation shall be no more than 3/1000.
Elevator control cabinet is used to control the operation of the elevator device,
The installation of the control cabinet should follow the maintenance of convenience, inspection of the principle of safety, according to the provisions of the location of the construction. If the drawings are not provided, should be based on the engine room area, the installation of a reasonable arrangement. In order to prevent the room water, the control cabinet in the installation of the best solid in the high about 100 ~ 150mrn cement pier. Stable control cabinet, the general first with the brick to the control cabinet pad to the required height, and then laying wire or wire trunking, to be completed after the wire tube or wire trash, and then watering cement piers, the control cabinet solid in the cement pier The
The control cabinet should meet the following requirements during installation:
(1) with the door, the window to maintain a sufficient distance, doors, windows and control cabinet of the distance should not be less than 1000mm.
(2) control cabinet installed in rows, and its width exceeds 5m, both ends should be left out of the channel, the channel width should be not less than 600mm.
(3) control cabinet and machine room equipment installation distance should not be less than 500mm.
(4) The vertical deviation of the control cabinet after installation shall be no more than 3/1000.
Comments
Post a Comment