Office furniture to buy the eight major points
Office furniture in today's rapid economic and social development background, it is both material and artistic value. But the face of the market on a variety of products, how can companies or individuals selected to the desirable, durable office furniture, many consumers are not the end of the heart.
Reasonable material
Office furniture is different from the surface of the same material there will be a difference. Such as desk, chair, cabinet legs, requiring hardwood, more solid, able to load, and internal materials are available other materials. But solid wood office furniture or many large companies to buy the main object.
Four feet smooth
This is very simple, pick the object on the ground when the flash is known, and some furniture only three legs landing. Another is to observe whether the table is straight, can not bow back or collapse of the waist. The table raised, the glass plate will turn around; desktop recess, put a pressure on the glass plate on the broken.
Package edge formation
Edge should be fillet, can not be straight. If the edge of the uneven, indicating that the material is more wet, easy to crack edge. Trim plywood inlaid furniture, the package is nail with nails, pay attention to whether the nail is smooth, nail and other parts of the color is consistent. Usually nail is sealed with a putty, if the putty drum up, unsightly also easy to fall out.
Patchwork
Patchwork, whether PVC, paste wood veneer, or paste the paint paper, should be observed whether the skin was posted flat, with or without drums, blistering, patchwork lax phenomenon. In the inspection to look at the light, or not easy to see it. Frozen wicker veneer veneer office furniture easier to damage, the service life is generally two years. In the case of wood veneer alone, the veneer is better than the peeling. General veneer furniture corner of the place easy to tilt, pick the hand when you can pull the corner, if a pull up, that there is a problem with glue.
Pay attention to environmental protection
Office furniture environmental issues are concerned about each user, in the purchase should be asked to ask whether the furniture in line with national environmental regulations, and hope that the other side to produce the relevant certification. But to buy the brand furniture, you can ask and ask the sales staff to make a reasonable explanation of the smell, and check the quality inspection certificate, the national inspection is indeed passed, the furniture contains a small amount of smell is the paint, adhesives and other inevitable, After the house opened the door for a period of time to eliminate.
Low moisture content
Water content is too high furniture quality problems, and increase the rate of formaldehyde release, seriously affecting the health of users. Office furniture moisture content shall not exceed 12%, otherwise there will be wood warping, deformation of the phenomenon, seriously affect the life of office furniture. General consumers to buy, you can use the hand touch method, hand touch the bottom of the furniture or inside there is no paint on the place, if the feeling of tide, then the water content at least 50% or more, simply can not be used. Another way is to paint the wood can not be sprinkled with a little water, if the bleak or not Yin, indicating high moisture content.
Check inside and outside
Wood drying is not complete, there will be insects, the end of the phenomenon. After the surface inspection is complete, it should also open the door, drawer door to see inside the material there is no decay, you can pinch a pinch pinch, pinch into the description of the material rotten (subject to the seller agreed to). In the open door with the nose after the smell, if washed nose, dazzling, then the glue in the formaldehyde content is too high, will be harmful to the human body.
Accessories are reasonable
Metal parts, plastic parts is the main use of the plate fastening joints, so the quality of metal pieces at the same time determine the quality of the quality of plate furniture. Among them, the metal parts require smart, smooth, good surface plating treatment, in particular, can not have rust, burrs, with the accuracy of the requirements of a higher. Plastic parts to shape handsome, colorful, the use of the strength of the parts must have the intensity and flexibility, not too thin. In the cabinet door and other open type of flexible connection, the internal spring is tight with the appropriate, so that office furniture will be used in the open balance, easy, no friction sound.
Reasonable material
Office furniture is different from the surface of the same material there will be a difference. Such as desk, chair, cabinet legs, requiring hardwood, more solid, able to load, and internal materials are available other materials. But solid wood office furniture or many large companies to buy the main object.
Four feet smooth
This is very simple, pick the object on the ground when the flash is known, and some furniture only three legs landing. Another is to observe whether the table is straight, can not bow back or collapse of the waist. The table raised, the glass plate will turn around; desktop recess, put a pressure on the glass plate on the broken.
Package edge formation
Edge should be fillet, can not be straight. If the edge of the uneven, indicating that the material is more wet, easy to crack edge. Trim plywood inlaid furniture, the package is nail with nails, pay attention to whether the nail is smooth, nail and other parts of the color is consistent. Usually nail is sealed with a putty, if the putty drum up, unsightly also easy to fall out.
Patchwork
Patchwork, whether PVC, paste wood veneer, or paste the paint paper, should be observed whether the skin was posted flat, with or without drums, blistering, patchwork lax phenomenon. In the inspection to look at the light, or not easy to see it. Frozen wicker veneer veneer office furniture easier to damage, the service life is generally two years. In the case of wood veneer alone, the veneer is better than the peeling. General veneer furniture corner of the place easy to tilt, pick the hand when you can pull the corner, if a pull up, that there is a problem with glue.
Pay attention to environmental protection
Office furniture environmental issues are concerned about each user, in the purchase should be asked to ask whether the furniture in line with national environmental regulations, and hope that the other side to produce the relevant certification. But to buy the brand furniture, you can ask and ask the sales staff to make a reasonable explanation of the smell, and check the quality inspection certificate, the national inspection is indeed passed, the furniture contains a small amount of smell is the paint, adhesives and other inevitable, After the house opened the door for a period of time to eliminate.
Low moisture content
Water content is too high furniture quality problems, and increase the rate of formaldehyde release, seriously affecting the health of users. Office furniture moisture content shall not exceed 12%, otherwise there will be wood warping, deformation of the phenomenon, seriously affect the life of office furniture. General consumers to buy, you can use the hand touch method, hand touch the bottom of the furniture or inside there is no paint on the place, if the feeling of tide, then the water content at least 50% or more, simply can not be used. Another way is to paint the wood can not be sprinkled with a little water, if the bleak or not Yin, indicating high moisture content.
Check inside and outside
Wood drying is not complete, there will be insects, the end of the phenomenon. After the surface inspection is complete, it should also open the door, drawer door to see inside the material there is no decay, you can pinch a pinch pinch, pinch into the description of the material rotten (subject to the seller agreed to). In the open door with the nose after the smell, if washed nose, dazzling, then the glue in the formaldehyde content is too high, will be harmful to the human body.
Accessories are reasonable
Metal parts, plastic parts is the main use of the plate fastening joints, so the quality of metal pieces at the same time determine the quality of the quality of plate furniture. Among them, the metal parts require smart, smooth, good surface plating treatment, in particular, can not have rust, burrs, with the accuracy of the requirements of a higher. Plastic parts to shape handsome, colorful, the use of the strength of the parts must have the intensity and flexibility, not too thin. In the cabinet door and other open type of flexible connection, the internal spring is tight with the appropriate, so that office furniture will be used in the open balance, easy, no friction sound.
Comments
Post a Comment