Elevator working principle and function
The two ends of the hoisting rope are respectively connected with the car and the counterweight, wound on the traction wheel and the guide wheel, the traction motor is driven by the reducer to drive the traction wheel, and the traction force caused by the friction between the hoisting rope and the traction wheel , To achieve the car and the weight of the movements, to achieve the purpose of transport.
Features
Modern elevators are mainly composed of traction machines (winch), rails, counterweight devices, safety devices (such as speed limiters, safety gears and buffers), signal handling systems, cars and hall doors. These parts are installed in the building of the shaft and the engine room. Usually using wire rope friction drive, wire rope around the traction wheel, both ends are connected to the car and the balance weight, the motor drive traction wheel to lift the car. Elevator requires safe and reliable, high transport efficiency, leveling accuracy and ride comfort. The basic parameters of the elevator are the rated load, the number of passengers, the rated speed, the car size and the hoist type.
Simple to use method (there are solutions in case of emergency):
Manned elevators are intelligent and automated equipment controlled by the computer, and no special personnel are required to operate the driving. Ordinary passengers can ride and operate the elevator according to the following procedure.
1, in the elevator floor elevator entrance, according to their own uplink or downlink needs, press the up or down arrow button, as long as the button on the light, it means that your call has been recorded, as long as waiting for the arrival of the elevator.
2, the elevator arrived at the door, let the car out of the elevator, and then call the elevator and then enter the elevator car. After entering the car, press the corresponding number button on the control panel of the car according to the floor you want to reach. Similarly, as long as the button light is on, then your selection layer has been recorded; this time without any other operation, as long as the elevator to reach your destination layer can be docked.
3, the elevator driving to your target layer will automatically open the door, at this time in order out of the elevator that is the end of a ride process.
The two ends of the hoisting rope are respectively connected with the car and the counterweight, wound on the traction wheel and the guide wheel, the traction motor is driven by the reducer to drive the traction wheel, and the traction force caused by the friction between the hoisting rope and the traction wheel , To achieve the car and the weight of the movements, to achieve the purpose of transport.
Features
Simple to use method (there are solutions in case of emergency):
Manned elevators are intelligent and automated equipment controlled by the computer, and no special personnel are required to operate the driving. Ordinary passengers can ride and operate the elevator according to the following procedure.
1, in the elevator floor elevator entrance, according to their own uplink or downlink needs, press the up or down arrow button, as long as the button on the light, it means that your call has been recorded, as long as waiting for the arrival of the elevator.
2, the elevator arrived at the door, let the car out of the elevator, and then call the elevator and then enter the elevator car. After entering the car, press the corresponding number button on the control panel of the car according to the floor you want to reach. Similarly, as long as the button light is on, then your selection layer has been recorded; this time without any other operation, as long as the elevator to reach your destination layer can be docked.
3, the elevator driving to your target layer will automatically open the door, at this time in order out of the elevator that is the end of a ride process.
Comments
Post a Comment