Home Padlock maintenance method one:
Most of the friends after the door, will always force the door to the door frame, so that it and the door between the most intimate hug, but this is not the door you want, we open the door, you should rotate the handle, let The door of the tongue indentation, and then the combination of the door frame, in the release of hand, in short, is to avoid a serious collision of the door, otherwise it will shorten its life.
Home lock maintenance method two:
When we open the door or close the door, it will often turn to it, over time it is not so flexible, so we need to ensure that the lock body rotation parts of the lubricant, so you can reduce the lock body itself friction, thereby increasing Lock the life of the lock itself, and in order to ensure the safety of the lock, we would like to always check the pin is loose phenomenon.
Home lock maintenance method three:
In addition to the lock we will often turn outside, the lock cylinder is also a place we often come into contact with a long time, the key in the process of plugging will not smooth, so we need to add some for the lock cylinder can lubricate it Of course, the lock cylinder is absolutely can not add lubricant or some oil substances, so we'd better choose to add some graphite powder is the pencil powder, it can play the best lubrication of the cylinder.
Family lock maintenance method four:
In addition to the above maintenance methods, we also often check the lock body and the lock plate between the gap, and the latch and the latch plate with the height of the door and the gap between the door and so on, if these with improper , We need to do the appropriate adjustment, otherwise it is easy to exist a certain security risks, and even shorten the life of the lock.
Home lock maintenance method five:
Some friends in the door lock when the astringent or tight, often like to lock the eye drops some oil, so that the lock may soon slip, but because the oil is easy to sticky, after the keyhole Will easily accumulate dust slowly, and the formation of oil putty, which makes the door lock more prone to failure, so, unless necessary, or do not lock the eyes plus lubricant. You can cut some pencil crushed or some candles at the end, through the thin tube into the lock cylinder inside, and then insert the key repeatedly turn several times.
Home lock maintenance method six:
Some time, due to the reasons for the gravity of the door itself or the door leaf reason, resulting in the door sink, there lock door or open the door is not smooth phenomenon. This time is often the key to open the door, lock the door is very difficult. At this point, do not force the twist key, so as not to break the key, increase the trouble. Check the cause first. If it is due to loosening of the loose leaf leaves the door, the loose loose leaf should be fixed with screws. If the door frame deformation or its causes can not be restored, you can start from the door frame, the corresponding expansion of the lock, so that the door lock door can be restored to normal smooth
Comments
Post a Comment